Trigger Studio
 |
US $750.00
Tip For the Indie Filmmaker - Building a Green Screen Hollywood Studio
Sometimes struggling filmmakers and film pupils now have the possibility to offer quality motion pictures, thanks to the assistance of an improvised green screen. The green screen Hollywood method or "chroma key technology" is on hand to everyone. It just takes a few hours, fresh paint, papers, fresh paint rollers, and some tape in making a custom-made screen. Listed here are some effortless steps on the way to create a green screen. Upon completing this, there will not any need to hire expensive facilities!
Get a practical place. The best site for a green chroma key screen is a room having a big wall structure. The place should also be large. Ask people around you whether they can spare their car port. This can be the temporary studio. When the ideal location is determined, go shopping for the required components.
Buy fresh paint and other essentials. When looking for paint, choose the perfect tone of green. It really should not be too light or way too dark. Additionally be sure that the color is the flat type. This is because glossy fresh paint may magnify light and trigger unattractive blemishes to the film. Right after finalizing the paint, buy additional painting materials. Buy some paint rollers, paint trays, and painting adhesives. Likewise get a hold of outdated newspapers. This can serve as protective linings to areas of the studio that really should not be colored green. Immediately after collecting all of the necessary things, proceed to doing the Do-it-yourself green screen Hollywood.
Establish boundaries. Line the surface of the floor close to the intended chroma key space with paper. Preferably, the lining needs to be 3 tiers thick. This would be enough to prevent the floor from any color splatters. Including more pieces of paper is recommended. After placing old newspaper all over the work area, safeguard them with tape. This is to ensure that the newspaper won't shift as the work is getting done. Furthermore, line the edges you would like to color with tape. The tape needs to be positioned as a protective edge for other parts of the wall which shouldn't be painted green. Once that is accomplished, start painting.
Make some art for art. Color the walls using a roller brush. The strokes should be even, to ensure that the colour and surface will be consistent. Remember that the screen is going to be used to make movie gems, so it is very important to apply paint properly. After painting the whole area, wait for the fresh paint to dry out before taking off the tape and newspaper linings. After the pain has dried and all the linings are taken out, the screen can now be used. With low-cost supplies, anybody can use green screen Hollywood technology to create movies.
Nikon D70 - how to tigger a slave with the built-in flash?
I have some studio strobes with an optical slave trigger. I want to use the built-in flash on my D70, but I don't want the built-in flash to contribute to the exposure. How can I rig that up?
The Nikon D70 uses an i-TTL system. Unfortunately, this system uses a pre-flash, so you need to forget about i-TTL.
Instead, you need to go into the D70 menu system (item 19) and switch the popup flash to manual. Set it to the lowest power possible. This will eliminate the preflash, but it will still be strong enough to trigger the studio strobes. If you are really concerned about even this amount of light from the flash in manual, then tape a piece of unexposed film over the popup flash, so that only IR gets through to set off the strobes (no visible flash to affect the exposure).
Alternatively, use an IR sender unit (link below) which fits in your hotshoe and triggers the strobes via an IR "flash".
DJing, Decks, and a Grid of Samples: NI’s New Take on Traktor (createdigitalmusic)
What should DJing software look like, anyway? It's just a teaser, but for
once, the idea is simple, straightforward, and clear. Native Instruments have
taken their DJ software, Traktor, and combined it with a grid of pads for
sample triggering and loops. The upcoming hardware/software combination we
expect later this spring. At the risk of … Continue ->
Trigger The Bloodshed - DEGENERATE - Studio Diary
You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.
Comments are closed.